How do I test on the H20N scale?

Weight Test

• Tap on the InBody scale
• Once “0.0” appears, step onto the InBody scale
• Weight measurement will flash on screen once weight stabilizes

InBody Test

• Press the dial to turn the power on
• Rotate the dial to the user’s height and press the dial to select
• Step on the device and align the user’s feet to the foot electrodes
• Wait for weight to be measured
• Once the weight is locked in, the screen will prompt “Pose”
• Grab the handle and align the thumbs to the hand electrodes
  • The hands and handle should be in front of the pelvis with the arms fully extended
• Maintain this posture until the test is complete and beeping sound occurs
• Results will be displayed on the scale until the user steps off or screen times out

InBody Test with InBody App

• Log into the user’s InBody App account
• Confirm H20N is connected (see “How do I connect the InBody H20 N with the InBody App”)
• Go to the “Health Report” tab
• Press the (+) icon on the bottom right corner
• Press the H20N icon to connect the device to the app
• Press “Yes” when asked to start the InBody Test
• The device will beep and display the height automatically
• Step on the device and align the user’s feet to the foot electrodes
• Wait for weight to be measured
• Once the weight is locked in, the screen will prompt “Pose”
• Grab the handle and align the thumbs to the hand electrodes
  • The hands and handle should be in front of the pelvis with the arms fully extended
• Maintain this posture until the test is complete and beeping sound occurs
• Results will appear on the screen and transfer to the user’s InBody App account